Manual page for GZIP(1)
gzip, gunzip, zcat - compress or expand files
SYNOPSIS
gzip
[ -acdfhlLnrtvV19 ]
[-S suffix]
[
name ...
]
gunzip
[ -acfhlLnrtvV ]
[-S suffix]
[
name ...
]
zcat
[ -fhLV ]
[
name ...
]
DESCRIPTION
Gzip
reduces the size of the named files using Lempel-Ziv coding (LZ77).
Whenever possible,
each file is replaced by one with the extension
.gz,
while keeping the same ownership modes, access and modification times.
(The default extension is
-gz
for VMS,
z
for MSDOS, OS/2 FAT and Atari.)
If no files are specified, the standard input is compressed to the
standard output.
Gzip
will only attempt to compress regular files.
In particular, it will ignore symbolic links.
If the new file name is too long for its file system,
gzip
truncates it and keeps the original file name in the compressed file.
Gzip
attempts to truncate only the parts of the file name longer than 3 characters.
(A part is delimited by dots.) If the name consists of small parts only,
the longest parts are truncated. For example, if file names are limited
to 14 characters, gzip.msdos.exe is compressed to gzi.msd.exe.gz.
Names are not truncated on systems which do not have a limit on file name
length.
Compressed files can be restored to their original form using
gzip -d
or
gunzip
or
zcat.
If the original name saved in the compressed file is not suitable for its
file system, a new name is constructed from the original one to make it
legal.
gunzip
takes a list of files on its command line and replaces each
file whose name ends with .gz, -gz, .z, -z, _z or .Z
and which begins with the correct magic number with an uncompressed
file without the original extension.
gunzip
also recognizes the special extensions
.tgz
and
.taz
as shorthands for
.tar.gz
and
.tar.Z
respectively.
When compressing,
gzip
uses the
.tgz
extension if necessary instead of truncating a file with a
.tar
extension.
gunzip
can currently decompress files created by
gzip, zip, compress, compress -H
or
pack.
The detection of the input format is automatic. When using
the first two formats,
gunzip
checks a 32 bit CRC. For
pack, gunzip
checks the uncompressed length. The standard
compress
format was not designed to allow consistency checks. However
gunzip
is sometimes able to detect a bad .Z file. If you get an error
when uncompressing a .Z file, do not assume that the .Z file is
correct simply because the standard
uncompress
does not complain. This generally means that the standard
uncompress
does not check its input, and happily generates garbage output.
The SCO compress -H format (lzh compression method) does not include a CRC
but also allows some consistency checks.
Files created by
zip
can be uncompressed by gzip only if they have a single member compressed
with the 'deflation' method. This feature is only intended to help
conversion of tar.zip files to the tar.gz format. To extract zip files
with several members, use
unzip
instead of
gunzip.
zcat
is identical to
gunzip
-c.
(On some systems,
zcat
may be installed as
gzcat
to preserve the original link to
compress.)
zcat
uncompresses either a list of files on the command line or its
standard input and writes the uncompressed data on standard output.
zcat
will uncompress files that have the correct magic number whether
they have a
.gz
suffix or not.
Gzip
uses the Lempel-Ziv algorithm used in
zip
and PKZIP.
The amount of compression obtained depends on the size of the
input and the distribution of common substrings.
Typically, text such as source code or English
is reduced by 60-70%.
Compression is generally much better than that achieved by
LZW (as used in
compress),
Huffman coding (as used in
pack),
or adaptive Huffman coding
(compact).
Compression is always performed, even if the compressed file is
slightly larger than the original. The worst case expansion is
a few bytes for the gzip file header, plus 5 bytes every 32K block,
or an expansion ratio of 0.015% for large files. Note that the actual
number of used disk blocks almost never increases.
gzip
preserves the mode, ownership and timestamps of files when compressing
or decompressing.
OPTIONS
- -a --ascii
-
Ascii text mode: convert end-of-lines using local conventions. This option
is supported only on some non-Unix systems. For MSDOS, CR LF is converted
to LF when compressing, and LF is converted to CR LF when decompressing.
- -c --stdout --to-stdout
-
Write output on standard output; keep original files unchanged.
If there are several input files, the output consists of a sequence of
independently compressed members. To obtain better compression,
concatenate all input files before compressing them.
- -d --decompress --uncompress
-
Decompress.
- -f --force
-
Force compression or decompression even if the file has multiple links
or the corresponding file already exists, or if the compressed data
is read from or written to a terminal. If the input data is not in
a format recognized by
gzip,
and if the option --stdout is also given, copy the input data without change
to the standard ouput: let
zcat
behave as
cat.
If
-f
is not given,
and when not running in the background,
gzip
prompts to verify whether an existing file should be overwritten.
- -h --help
-
Display a help screen and quit.
- -l --list
-
For each compressed file, list the following fields:
compressed size: size of the compressed file
uncompressed size: size of the uncompressed file
ratio: compression ratio (0.0% if unknown)
uncompressed_name: name of the uncompressed file
The uncompressed size is given as -1 for files not in gzip format,
such as compressed .Z files. To get the uncompressed size for such a file,
you can use:
zcat file.Z | wc -c
In combination with the --verbose option, the following fields are also
displayed:
method: compression method
crc: the 32-bit CRC of the uncompressed data
date & time: time stamp for the uncompressed file
The compression methods currently supported are deflate, compress, lzh
(SCO compress -H) and pack. The crc is given as ffffffff for a file
not in gzip format.
With --verbose, the size totals and compression ratio for all files
is also displayed, unless some sizes are unknown. With --quiet,
the title and totals lines are not displayed.
- -L --license
-
Display the
gzip
license and quit.
- -n --no-name
-
When compressing, do not save the original file name by default. (The
original name is always saved if the name had to be truncated.) When
decompressing, do not restore the original file name if present: remove
only the
gzip
suffix from the compressed file name.
- -q --quiet
-
Suppress all warnings.
- -r --recurse
-
Travel the directory structure recursively. If any of the file names
specified on the command line are directories,
gzip
will descend into the directory and compress all the files it finds there
(or decompress them in the case of
gunzip
).
- -S .suf --suffix .suf
-
Use suffix .suf instead of .gz. Any suffix can be given, but suffixes
other than .z and .gz should be avoided to avoid confusion when files
are transferred to other. A null suffix forces gunzip to try
decompression on all given files regardless of suffix, as in:
gunzip -S "" * (*.* for MSDOS)
Previous versions of gzip used
the .z suffix. This was changed to avoid a conflict with
pack.(1
- -t --test
-
Test. Check the compressed file integrity.
- -v --verbose
-
Verbose. Display the name and percentage reduction for each file compressed
or decompressed.
- -V --version
-
Version. Display the version number and compilation options then quit.
- -# --fast --best
-
Regulate the speed of compression using the specified digit
#,
where
-1
or
--fast
indicates the fastest compression method (less compression)
and
-9
or
--best
indicates the slowest compression method (optimal compression).
The default compression level is
-6
(that is, biased towards high compression at expense of speed).
ADVANCED USAGE
Multiple compressed files can be concatenated. In this case,
gunzip
will extract all members at once. For example:
gzip -c file1 > foo.gz
gzip -c file2 >> foo.gz
Then
gunzip -c foo
is equivalent to
cat file1 file2
In case of damage to one member of a .gz file, other members can
still be recovered (if the damaged member is removed). However,
you can get better compression by compressing all members at once:
cat file1 file2 | gzip > foo.gz
compresses better than
gzip -c file1 file2 > foo.gz
If you want to recompress concatenated files to get better compression, do:
zcat old.gz | gzip > new.gz
If a compressed file consists of several members, the uncompressed
size and CRC reported by the --list option applies to the last member
only.
ENVIRONMENT
The environment variable
GZIP
can hold a set of default options for
gzip.
These options are interpreted first and can be overwritten by
explicit command line parameters. For example:
for sh: GZIP="-8 -v"; export GZIP
for csh: setenv GZIP "-8 -v"
for MSDOS: set GZIP=-8 -v
On Vax/VMS, the name of the environment variable is GZIP_OPT, to
avoid a conflict with the symbol set for invocation of the program.
SEE ALSO
znew(1), zcmp(1), zmore(1), zforce(1), gzexe(1), zip(1), unzip(1), compress(1),
pack(1), compact(1)
DIAGNOSTICS
Exit status is normally 0;
if an error occurs, exit status is 1. If a warning occurs, exit status is 2.
Usage: gzip [-cdfhlLnrtvV19] [-S suffix] [file ...]
Invalid options were specified on the command line.
file:
not in gzip format
The file specified to
gunzip
has not been compressed.
file:
Corrupt input. Use zcat to recover some data.
The compressed file has been damaged. The data up to the point of failure
can be recovered using
zcat file > recover
file:
compressed with
xx
bits, can only handle
yy
bits
File
was compressed (using LZW) by a program that could deal with
more
bits
than the decompress code on this machine.
Recompress the file with gzip, which compresses better and uses
less memory.
file:
already has .gz suffix -- no change
The file is assumed to be already compressed.
Rename the file and try again.
file
already exists; do you wish to overwrite (y or n)?
Respond "y" if you want the output file to be replaced; "n" if not.
gunzip: corrupt input
A SIGSEGV violation was detected which usually means that the input file has
been corrupted.
xx.x%
Percentage of the input saved by compression.
(Relevant only for
-v
and
-l.)
-- not a regular file or directory: ignored
When the input file is not a regular file or directory,
(e.g. a symbolic link, socket, FIFO, device file), it is
left unaltered.
-- has
xx
other links: unchanged
The input file has links; it is left unchanged. See
ln.(1
for more information. Use the
-f
flag to force compression of multiply-linked files.
CAVEATS
When writing compressed data to a tape, it is generally necessary to
pad the output with zeroes up to a block boundary. When the data is
read and the whole block is passed to
gunzip
for decompression,
gunzip
detects that there is extra trailing garbage after the compressed data
and emits a warning by default. You have to use the --quiet option to
suppress the warning. This option can be set in the
GZIP
environment variable as in:
for sh: GZIP="-q" tar xfz /dev/rmt/datn
for csh: (setenv GZIP "-q"; tar xfz /dev/rmt/datn)
In the above example, gzip is invoked implicitly by the -z option
of GNU tar. Make sure that the same block size (-b option of
tar) is used for reading and writing compressed data on tapes.
BUGS
The --list option reports incorrect sizes if they exceed 2 gigabytes.
The --list option reports sizes as -1 and crc as ffffffff if the
compressed file is on a non seekable media.
Created by unroff & hp-tools.
© somebody (See intro for details). All Rights Reserved.
Last modified 11/5/97